Purtrex™ patronfiltre

Features and Benefits

The Purtrex depth filter is an exceptional value for generalapplications where long life, high purity and low change-outfrequency are required. Produced through GE’s patented meltblown microfiber technology, Purtrex is a 100% purepolypropylene depth filter with exceptional dirt-holding capacity.

Purtrex’ true-graded density filter matrix (lower density at thesurface of the filter with progressively higher density toward thecenter) captures particles throughout the entire filter depth. Thistranslates to longer life and fewer change-outs than existing string-wound or resin-bonded filters.

Purtrex contains no wetting agents, solvents, antistatic agents orbinders, and meets the requirements of the FDA for food andbeverage contact. The filter incinerates to trace ash for easydisposal.


  • Potable water filtration
  • Chemical filtration – wide chemical complaibility
  • Plating baths
  • Amine filtration
  • Meets FDA compliance for food and beverage contact

Materials of Construction

  • Filtration Media — Polypropylene
  • Endcaps and Adapters — Polypropylene


Nominal O.D. = 2.50″ (6.4 cm)

Nominal I.D. =  1″ (2.5 cm)

Available Micron Ratings

1, 3, 5, 10, 20, 30, 50, and 75 micron

Anvendelse: Industri

Produktspecifikationer for Purtrex patronfiltre

Additional Information

Purtrex Depth cartridge filters are made from thermally-bonded fibers of polypropylene. GE certifies that it uses noresin binders, lubricants, antistatic or release agents orother additives in the manufacture of these cartridges, andthat the resin used for manufacturing the filter media meetsthe food contact requirements of the U.S. FDA 21 CFRregulations. When required, specify only FDA compliansealing materials and end adapters.

GE filter cartridges are designed and manufactured forresistance to a wide range of chemical solutions. Conditionswill vary with each application and users should carefullyverify chemical compatibility. Please contact your GEdistributor for more information.

Ordering Information

To configure a standard Purtrex filter with no adapters on either end), select one designation from each of the first three columns. Your Product OrderNumber will look like this: PX05-29 1/4. To order Purtrex with end adapters, add one item from the last 2 columns to your filter selections (use all 6columns). Your Product Order Number will look like this: PX05-29 1/4 YYP or PX05-29 1/4 XK.

*) Santoprene is a registered trademark of Advanced Elastomer Systems, L.P

Yderligere information


30 – 2000 µm


16 bar


4,5 – 243 m3/h

Du kunne også være interesseret i...

Jeg er interesseret i at høre mere

Find en HiFlux partner nær dig

HiFlux Filtration A/S er specialiseret i at levere filterløsninger til industrielle formål. Virksomheden kan tilbyde flere end 20.000 kombinationsmuligheder inden for udvalget af standard filtre. Samtidig løses utallige specialopgaver tilpasset behovene hos de enkelte kunder. Derfor er rådgivning og problemløsning en vigtig del af virksomhedens aktiviteter.

Find partnere